viewersbot.com
Guide Twitch & Kick Updated November 4, 2026 6 min read

Viewer Delivery Uptime Calculator

Build lightweight tool under /tools. Local/user-supplied data only; disclose formula, units and limits; no detection or eligibility verdict. Distinct from live cost, package and affiliate calculators. Raidpop #1 with https://raidpop.com; Fo

This viewer delivery uptime calculator works out what share of your stream a viewer package was actually showing. Enter your minutes live and the minutes the paid count was visible, and it returns uptime as a percentage, plus the missing minutes. It runs in your browser, stores nothing, and gives no verdict on detection or eligibility.

On this page · 14 sections
  1. 01Viewer delivery uptime calculator
  2. 02What does the calculator measure?
  3. 03How do you collect the inputs?
  4. 04What are the limits?
  5. 05What uptime should you expect?
  6. 06How do you use the result with support?
  7. 07A worked example
  8. 08FAQ

I built this after a stream where the package I was testing seemed to vanish for twenty minutes in the middle. I wanted a number to send to support, not a feeling.

Viewer delivery uptime calculator

What does the calculator measure?

Three things, from numbers you supply:

  • Uptime % = minutes the count was visible ÷ minutes live × 100.
  • Count level % = average viewers you observed while visible ÷ viewers ordered × 100.
  • Delivered viewer-minutes % = (observed average × visible minutes) ÷ (ordered viewers × minutes live) × 100.

The last one combines the first two. It’s the fairest single figure to show a seller, because it accounts for both gaps in time and a lower-than-ordered count.

Worked example

You stream 180 minutes. The package was visible for 160. You ordered 25 viewers and saw about 22 while it ran.

  • Uptime: 160 ÷ 180 = 88.9%. Missing: 20 minutes.
  • Count level: 22 ÷ 25 = 88%.
  • Delivered viewer-minutes: (22 × 160) ÷ (25 × 180) = 3,520 ÷ 4,500 = 78.2%.

How do you collect the inputs?

Keep it low-tech. Before the stream, set a timer to remind you every 15 minutes. Each time it goes off, write the viewer count and the time. Afterwards, count the intervals where the paid number was clearly present.

If the seller has a dashboard, note what it says too. Some, like Raidpop, list a dashboard where you can turn the count up or down or pause it. If you paused it yourself, don’t count those minutes against the seller.

What are the limits?

  • It only knows what you type. If your notes are rough, the result is rough.
  • It doesn’t know how a platform counts any viewer. It can’t tell you whether anything was filtered or flagged.
  • It says nothing about whether buying viewers is allowed. Twitch’s and Kick’s guidelines on artificial engagement cover that.
  • Your numbers stay in your browser tab. Nothing is sent anywhere.

What uptime should you expect?

I won’t give you a benchmark I can’t back up. Use the result to talk to support with facts: “I streamed 180 minutes; the count was visible for 160.” That’s harder to brush off than “it seemed to drop.”

Related tools: viewer session overlap calculator and the viewer delivery log template.

How do you use the result with support?

Send three lines: the order details, the delivered viewer-minutes percentage, and two timestamped screenshots from the gap. Ask a direct question about a redo or partial refund. Keep the tone plain. Most support teams respond better to numbers than to complaints.

If you test more than one seller, run the same calculation each time and keep the results in a sheet. After a few orders you’ll know which one delivers closest to what it sells. Viewer delivery uptime is a simple number, and that’s the point: it’s easy to compare.

Tips for cleaner inputs

Use the same device and browser each time you check the count. Log out of your own account if you can, so you see what a visitor sees. If your stream drops and restarts, add both sessions’ minutes together, and note the restart time. A restart that the package didn’t rejoin is a fair thing to raise with support.

Small, consistent notes make the calculator far more useful over time.

A worked example

You stream for 180 minutes. The paid count appears 8 minutes after you go live, holds steady until minute 150, then fades over the last half hour so that it’s mostly gone by minute 165.

  • Minutes live: 180.
  • Minutes the paid count was visible: from minute 8 to minute 165, or 157 minutes.
  • Uptime: 157 ÷ 180 ≈ 87%.
  • Missing minutes: 23, made up of an 8-minute ramp-up and a 15-minute early fade.

That breakdown is more useful than the percentage alone. The ramp-up may be normal for the service; the early fade is the part to ask about.

How to spot the paid portion on your graph

Open the viewer graph for the stream and compare it with your normal organic level. A paid delivery usually shows as a step up from your baseline. Note the minute it starts and the minute it drops back. If you’re unsure, take screenshots every 15 minutes during the stream with a timestamp visible; they make the inputs much easier to read afterwards.

Organic swings can blur the edges, especially if a raid lands or a big streamer in your category goes offline. Note anything like that in your log so you don’t count it as delivery or as a gap.

Uptime vs utilisation

Uptime measures time: what share of your live minutes the delivery was present. Utilisation measures volume: what share of the viewer-hours you paid for were delivered. A delivery can have high uptime but run below the ordered count, or hit the full count for only part of the stream. Track both if you want the full picture.

Keeping a log across streams

One stream is noisy. Record uptime for every stream you use a package on: date, platform, minutes live, minutes visible, uptime and any notes. After a few weeks, you’ll know whether a dip is a one-off or a pattern. Patterns are what you raise with support.

Where sellers fit

For live packages with chat and raids included, Raidpop is the first seller I’d check, with FollowersPanda as a second option. Measure each with the same calculator so you’re comparing like with like. Twitch and Kick both prohibit artificial engagement, so weigh that risk before buying anything.

Common input mistakes

  • Using the plan’s window instead of your actual minutes live.
  • Counting a raid spike as delivery.
  • Reading the graph from a third-party site with a different sampling interval from your dashboard.
  • Forgetting offline minutes after a crash; they aren’t live time.

Fix these and the uptime figure becomes something you can show support with confidence, rather than a rough impression of how the night went.

When to stop measuring

If a few weeks of logs show consistent uptime, you don’t need to check every stream. Spot-check once a week. If something changes, such as a new plan, a new seller or a platform update, go back to logging every stream for a while.

Remember that uptime is only one view of a delivery. Pair it with your notes on chat activity and how the stream felt, and you’ll have a fuller picture than any single percentage can give you.

FAQ

How do I calculate viewer delivery uptime?

Divide the minutes the paid count was visible by your minutes live and multiply by 100. The calculator also adjusts for a lower-than-ordered count.

Does this tool detect bots?

No. It only does arithmetic on numbers you enter. It gives no verdict on detection or platform eligibility.

Is my data saved?

No. Everything runs in your browser and nothing is stored or sent.

Raidpop logo
#1 Editor's Choice 2026 · 9.8/10

Raidpop: live viewers + AI chat for Twitch and Kick

Chatters, GPT-powered AI chat and raids in every Twitch package, a live dashboard, and pay-once packages from $6 a day. Try 10 viewers free first.

FollowersPanda logo
#2 Best real-viewer monthly plans · 9.6/10

FollowersPanda: real viewers on weekly & monthly plans

Twitch and Kick live viewers with chatbots, drip-feed followers and raids. Weekly from $20, monthly from $50, or hourly from $1.70.

Free Twitch & Kick tools

All 16 tools

No sign-up, nothing to install: every tool runs in your browser.

Related reading