A viewer plan start/stop checklist for scheduled streams makes sure an order begins when your stream does and ends when you’re finished. Before the stream: confirm the plan is active, the channel name is right, the start time is in the correct time zone, and your stream key works. After the stream: check whether the order paused, ended or is still running, and log what happened. Ten minutes of checks saves hours of lost coverage.
On this page · 11 sections
Most of the problems I hear about with viewer orders aren’t about the seller. They’re about timing. The order started before the stream, or ran after it ended, or never started because the channel name had a typo.
So here’s the routine I’d follow for any scheduled stream with a viewer plan attached.
Before the stream: the day before
- Check the plan is active and covers tomorrow’s stream date and time.
- Confirm the channel name on the order matches your channel exactly. A single wrong letter sends the order nowhere.
- Check the time zone of any scheduled start. See timezone settings.
- Read the start rule: does the order begin at payment, at go-live, or at a time you set?
- Check renewal: will the plan renew in the middle of tomorrow’s stream?
Before the stream: 30 minutes out
- Open the seller’s dashboard, if there is one, and check the order status.
- If you scheduled a start, confirm the time once more against your local clock.
- Run a quick test of your stream setup so you go live on time.
- Have your moderators ready and briefed on any AI chat settings.
- Set up your stream log for the session: start time, notes, viewer readings.
Go-live
Note the exact time you went live. Watch for the paid count to arrive and write down when it does. Some sellers say they join automatically; Raidpop‘s Kick page, captured 1 November 2026, lists “Joins automatically when you go live.” Check whether what you see matches what’s promised.
During the stream
- Log the viewer count every 15 to 30 minutes.
- Note any drops, restarts or breaks with times.
- If you take a planned break, use the pause option if the seller offers one, or a BRB scene.
After the stream
- Note the end time.
- Check the order status. Did it pause, end, or is it still running?
- If it’s still running and you don’t want it to, pause or stop it from the dashboard, or contact support.
- Record arrival delay, coverage and any gaps in your log.
- Run the numbers with the delivery uptime calculator.
Worked example
You schedule a stream for 7:00 PM. You go live at 7:04. Viewers arrive at 7:07. You end at 10:00. The dashboard shows the order paused at 10:01. Coverage: 173 of 176 live minutes, about 98%. Log it and move on. If instead the order showed “running” at 10:30 with no stream, you’d know the clock runs offline, which changes your plan choice next time.
What about recurring schedules?
If you stream on the same days each week, set calendar reminders for the day-before and 30-minute checks. Write the plan’s end and renewal dates in the same calendar. When the plan ends, you’ll see it coming rather than discovering it mid-stream.
And policy?
This checklist is about logistics. Twitch’s and Kick’s community guidelines prohibit artificial engagement, and no checklist changes that. See Kick policy and account risk checklist and bot viewers and Twitch Affiliate.
The printable version
- ☐ Day before: plan active, channel name correct, time zone checked, start rule known, renewal checked
- ☐ 30 min out: dashboard status, scheduled time confirmed, setup tested, moderators briefed, log ready
- ☐ Go-live: note time, note arrival
- ☐ During: log counts, note drops and breaks
- ☐ After: note end, check status, stop if needed, log coverage
Related: what happens when the stream goes offline and billing cycle vs streaming schedule.
A viewer plan start/stop checklist is boring by design. Run it every time, and timing problems stop being surprises.
What goes wrong most often?
In rough order of how often I see it: a channel name typo, a time zone mix-up, a plan that expired the day before, an order that kept running after the stream, and a renewal that charged in the middle of a stream. Every one of those is caught by the day-before check or the after-stream check. That’s why the two ends of the routine matter most, and the middle mostly takes care of itself.
If you only have time for one check, do the day-before one. Catching a problem the evening before gives you time to fix it calmly. Catching it at go-live means fixing it while your real viewers wait.
Changing your channel name
If you rename your channel, every active order tied to the old name may stop working. Update the seller before the rename takes effect. Our channel name change checklist covers the steps.
How do you adapt the checklist for a co-stream or event?
Special streams add moving parts. A co-stream may start at a time set by someone else. A charity event may run longer than planned. A tournament may have breaks you don’t control. For these, add three steps to the routine.
First, confirm the start time with the other party in writing, in one time zone, the day before. Second, check how long your plan covers and whether it can stretch if the event overruns. Third, agree with your moderators on who will pause or stop the order if the schedule changes suddenly. Events are exactly when nobody remembers to check the dashboard, so name the person in advance.
Worked example: an overrun
You plan a 3-hour charity stream from 6:00 PM. Your plan is a 1-day order bought at 5:30 PM, running 24 hours from payment. The stream overruns to 11:30 PM. No problem: the order still has time. Now suppose the order ended at midnight in the seller’s time zone, which is 9:00 PM for you. The last two and a half hours would have been uncovered. Knowing the rule beforehand means you can buy accordingly or accept the gap.
Should moderators run any of this?
They can. The after-stream check is a good one to hand over, since you’re often tired or chatting with regulars after ending. Give a trusted moderator read-only access to the order status if the seller supports it, or ask them to screenshot the dashboard at end time. Keep account access minimal; see the account access checklist.
FAQ
How do I make a viewer order start when my stream starts?
Check whether the seller starts at payment, at go-live or at a scheduled time, confirm the time zone, and verify the channel name the day before.
What should I check after a stream with a viewer plan?
Note the end time, check whether the order paused or is still running, stop it if needed, and log coverage.
Why didn’t my viewer order start?
Common causes are a typo in the channel name, a scheduled time in the wrong time zone, or a plan that had already expired.
Does a viewer order stop automatically when I end my stream?
Some do and some don’t. Check the order status after each stream until you know how your seller behaves.

Raidpop: live viewers + AI chat for Twitch and Kick
Chatters, GPT-powered AI chat and raids in every Twitch package, a live dashboard, and pay-once packages from $6 a day. Try 10 viewers free first.

FollowersPanda: real viewers on weekly & monthly plans
Twitch and Kick live viewers with chatbots, drip-feed followers and raids. Weekly from $20, monthly from $50, or hourly from $1.70.
Free Twitch & Kick tools
All 16 toolsNo sign-up, nothing to install: every tool runs in your browser.